advanced power n-channel enhancement mode electronics corp. power mosfet low on-resistance bv dss 30v simple drive requirement r ds(on) 2.8m ? fast switching characteristic i d 80a rohs compliant & halogen-free description absolute maximum ratings symbol units v ds v v gs v i d @t c =25 a i d @t c =100 a i dm a p d @t c =25 w t stg t j symbol value units rthj-c maximum thermal resistance, junction-case 1.2 /w rthj-a 40 /w data & specifications subject to change without notice 201210121 1 thermal data parameter maximum thermal resistance, junction-ambient (pcb mount) 3 storage temperature range operating junction temperature range -55 to 150 -55 to 150 total power dissipation gate-source voltage + 20 continuous drain current 4 80 continuous drain current 4 80 pulsed drain current 1 300 parameter rating drain-source voltage 30 ap2r803gs-hf 104 halogen-free product the to-263 package is widely preferred for all commercial-industrial surface mount applications using infrared reflow technique and suited fo r high current application due to the low connection resistance. g d s a dvanced power mosfets from apec provide the designer with the best combination of fast switching, ruggedized device design, low on- resistance and cost-effectiveness. g d s to-263(s)
electrical characteristics@t j =25 o c(unless otherwise specified) symbol parameter test conditions min. typ. max. units bv dss drain-source breakdown voltage v gs =0v, i d =250ua 30 - - v r ds(on) static drain-source on-resistance 2 v gs =10v, i d =40a - - 2.8 m ? v gs =4.5v, i d =30a - - 4.8 m ? v gs(th) gate threshold voltage v ds =v gs , i d =250ua 1 - 3 v g fs forward transconductance v ds =10v, i d =30a - 75 - s i dss drain-source leakage current v ds =30v, v gs =0v - - 10 ua i gss gate-source leakage v gs =+ 20v, v ds =0v - - + 100 na q g total gate charge i d =30a - 28 45 nc q gs gate-source charge v ds =24v - 5.3 - nc q gd gate-drain ("miller") charge v gs =4.5v - 16 - nc t d(on) turn-on delay time v ds =15v - 10 - ns t r rise time i d =30a - 80 - ns t d(off) turn-off delay time r g =3.3 ? -28- ns t f fall time v gs =10v - 84 - ns c iss input capacitance v gs =0v - 2800 4480 pf c oss output capacitance v ds =25v - 790 - pf c rss reverse transfer capacitance f=1.0mhz - 240 - pf r g gate resistance f=1.0mhz - 1.5 3 ? source-drain diode symbol parameter test conditions min. typ. max. units v sd forward on voltage 2 i s =40a, v gs =0v - - 1.2 v t rr reverse recovery time i s =10a, v gs =0 v , - 44 - ns q rr reverse recovery charge di/dt=100a/s - 52 - nc notes: 1.pulse width limited by max. junction temperature 2.pulse test 4.package limitation current is 80a . this product is sensitive to electrostatic discharge, please handle with caution. use of this product as a critical component in life support or other similar systems is not authorized. apec does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. apec reserves the right to make changes without further notice to any products herein to improve reliability, function or design. 2 3.surface mounted on 1 in 2 copper pad of fr4 board ap2r803gs-hf
a p2r803gs-hf fig 1. typical output characteristics fig 2. typical output characteristics fig 3. on-resistance v.s. gate voltage fig 4. normalized on-resistance v.s. junction temperature fig 5. forward characteristic of fig 6. gate threshold voltage v.s. reverse diode junction temperature 3 0 40 80 120 160 0.0 1.0 2.0 3.0 4.0 v ds , drain-to-source voltage (v) i d , drain current (a) t c =150 o c 10v 7 .0v 6.0v 5.0 v v g =4.0v 0 50 100 150 200 250 300 0.0 1.0 2.0 3.0 4.0 v ds , drain-to-source voltage (v) i d , drain current (a) t c =25 o c 10v 7.0 v 6.0v 5.0 v v g = 4.0 v 0.4 0.8 1.2 1.6 2.0 -50 0 50 100 150 t j , junction temperature ( o c) normalized r ds(on) i d =40a v g =10v 0 10 20 30 40 0 0.4 0.8 1.2 v sd , source-to-drain voltage (v) i s (a) t j =25 o c t j =150 o c 2 2.4 2.8 3.2 3.6 4 246810 v gs , gate-to-source voltage (v) r ds(on) (m ) i d =30a t c =25 o c 0.0 0.4 0.8 1.2 1.6 -50 0 50 100 150 t j , junction temperature ( o c) normalized v gs(th)
ap2r803gs-hf fig 7. gate charge characteristics fig 8. typical capacitance characteristics fig 9. maximum safe operating area fig 10. effective transient thermal impedance fig 11. switching time waveform fig 12. gate charge waveform 4 1 10 100 1000 0.1 1 10 100 v ds ,drain-to-source voltage (v) i d (a) t c =25 o c s in g le puls e 100us 1ms 10ms 100ms dc 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 t , pulse width (s) normalized thermal response (r thjc ) p dm duty factor = t/t peak t j = p dm x r thjc + t c t t 0.02 0.01 0.05 0.1 0.2 duty factor = 0.5 single pulse 0 2 4 6 8 10 0 1020304050 q g , total gate charge (nc) v gs , gate to source voltage (v) i d =30a v ds =15v v ds =18v v ds =24v 0 1000 2000 3000 4000 1 5 9 1317212529 v ds ,drain-to-source voltage (v) c (pf) f=1.0mhz c iss c oss c rss q v g 4.5v q gs q gd q g charge t d(on) t r t d(off) t f v ds v gs 10% 90%
|
